Print of the Month April '18

Hey guys, for this months POTM I thought I'd print myself a little something to tide me over while I wait for my Tesla Model 3...

It's a little supercharger for my work phone!

I have to say, I've been having a few problems recently with the extruder jamming on me and I'm not sure why yet. This meant I had to try three times before I managed to get a finished print of the white sides of the charger...

One of the failed prints

I'm not sure if the new filament I got has gummed up the nozzle, or if it's just time for me to get a new one (it's the same nozzle that came with my printer last year and has had around 8kg of plastic through it!).

I'll keep trying to print stuff but in the meantime I will order a set of new nozzles from Cetus and see if I can get things working again.

Another issue I had with the print was that I ran out of silver on the base, totally my fault, so I had to swap material half way through...

The print itself should have been fairly painless, and if you fancy your own little Tesla supercharger for your desk, you can pick up the models here.

There is also new software out for the Cetus! It seems that they are phasing out the Cetus specific software and moving to a generic UP software. At first glance it looks fairly similar, but I'll do a deep dive at some point and let you guys know the differences in a future blog.

Keeping it brief this week as it's late and I'm a little frustrated at the jammed printer so I'll see you all next week for something hopefully a little more upbeat!

Troez.

Comments

Ovion's Battletech 3D Printable Models

Hey guys, this week I wanted to draw attention to the Patreon of a guy on the Battletech Discord. He's a freelance 3d modeler and is doing some really cool stuff for tabletop Battletech, Warhammer and Dungeons & Dragons communities. As I know him from the Battletech Discord (Come check it out by the way) I'm going to showcase some of the models he's put up on his Patreon in relation to the game with the big stompy mechs! All of his models are created by him from scratch and they look great! I won't put any names with them, for copyrighting reasons, but I'm sure you Battletech fans out there will be able to figure out what's what. I picked a small selection of his models to show here, but go check out his page for the whole lot and he is releasing new models all the time. Tanks 'Mechs If you don't see what you like or if Battletech isn't your thing, he does commissions for custom models so it would definitely be wor

Heroforge

If any of you play table top games like Dungeons and Dragons or Pathfinder you will know there is no limit to the companies providing high quality miniatures for your games. However if you want to stray from the norm, and for example have a steampunk Dwarf or Elf, where do you go? Games Workshop make great miniatures but they are limited to the armies that they use in their games. Places like Dark Sword Minis or Reaper provide a more traditional set of miniatures for fantasy type games and even a few for Sci Fi, but what if you need that one miniature that suits your character perfectly but doesn't exist? Well with the advent of 3D printing, some companies have begun to offer online customisation of miniatures which you can order printed or even download the STL files to print yourself at home. The most well known of these sites is Heroforge . Heroforge allows you massive amounts of customisation for your miniature, from race and gender all the way down to clo

GUIDE: Creating supports in Meshmixer

Hey guys, one of the most important things to think about when 3D printing is the support material. With out sufficient support, models with steep overhangs or floating parts will simply fail to print correctly and you will end up with a pile of spaghetti. Most slicing programs will be able to create their own support, as mentioned in my "How to print" series of posts, however, for some models this is simply not good enough. The most widely used alternative is Meshmixer, and in this post we're going to look at how to generate support material using it's analysis tools. Import the model, this step is fairly self explanatory. Open Meshmixer and import the model you wish to print, either by clicking on the import button on the home screen and navigating to your model, or dragging your model into the program. I'll be using the standard bunny included in the program for this tutorial. Head over to the menu bar on the left of the screen and click on anal

troez3D

Search This Blog