REVIEW: Mini Photography Box

Hey guys, sorry about the lapse in communication last week, I decided there was a little bit too much going on last weekend with my wedding to really get a decent blog post out. But I'm back this week and I thought id talk about the cheap mini photobox I picked up on Amazon last week.

I really feel that this is going to improve the quality of the photos I take of my miniatures, especially when used in tandem with the mini macro lenses I talked about the other week.

So what did I get for my £12? First of all, it comes flat packed in its own pull string bag which is neat;

It also came with lots of different coloured backdrops, so depending on what I'm photographing I can change the background to make the item really stand out. However I have only really used the black one so far and i'm not sure which of the other colours will be useful, maybe white if I'm taking a picture of a very dark item;

Once folded out and assembled using the popsnap(?) things it holds it's shape really nicely, and you can see the built in LED strips on the roof of the box. It also has a circular opening in the top for taking top down photographs of your subject;

It did also come with two micro USB cables and at first I wasn't sure how I was going to power them, but it does in fact work with my power bank, making the whole thing even more portable than I had first thought;

I did find that because the backdrops had been folded in half, there was an obvious crease in the backgrounds of my photos, and I'm not a big fan of the pattern on the material.

However it was incredibly good value for what I paid and I can always replace the backdrops with a better quality material later.

I did also find it hard to get my phone into a good position to take photos due to the walls of the box, but if I was using a DSLR with a more expensive lens I'm sure that wouldn't have been an issue.

Here are some of my first attempts with the photobox, taking pictures of some miniatures and prints;

If you want to see more, go check out my Instagram!

Finally here is a link to the box in question.

Well guys, that'll do me for this week. Hopefully will see you all again in a weeks time.

Troez.

Comments

Ovion's Battletech 3D Printable Models

Hey guys, this week I wanted to draw attention to the Patreon of a guy on the Battletech Discord. He's a freelance 3d modeler and is doing some really cool stuff for tabletop Battletech, Warhammer and Dungeons & Dragons communities. As I know him from the Battletech Discord (Come check it out by the way) I'm going to showcase some of the models he's put up on his Patreon in relation to the game with the big stompy mechs! All of his models are created by him from scratch and they look great! I won't put any names with them, for copyrighting reasons, but I'm sure you Battletech fans out there will be able to figure out what's what. I picked a small selection of his models to show here, but go check out his page for the whole lot and he is releasing new models all the time. Tanks 'Mechs If you don't see what you like or if Battletech isn't your thing, he does commissions for custom models so it would definitely be wor

Heroforge

If any of you play table top games like Dungeons and Dragons or Pathfinder you will know there is no limit to the companies providing high quality miniatures for your games. However if you want to stray from the norm, and for example have a steampunk Dwarf or Elf, where do you go? Games Workshop make great miniatures but they are limited to the armies that they use in their games. Places like Dark Sword Minis or Reaper provide a more traditional set of miniatures for fantasy type games and even a few for Sci Fi, but what if you need that one miniature that suits your character perfectly but doesn't exist? Well with the advent of 3D printing, some companies have begun to offer online customisation of miniatures which you can order printed or even download the STL files to print yourself at home. The most well known of these sites is Heroforge . Heroforge allows you massive amounts of customisation for your miniature, from race and gender all the way down to clo

GUIDE: Creating supports in Meshmixer

Hey guys, one of the most important things to think about when 3D printing is the support material. With out sufficient support, models with steep overhangs or floating parts will simply fail to print correctly and you will end up with a pile of spaghetti. Most slicing programs will be able to create their own support, as mentioned in my "How to print" series of posts, however, for some models this is simply not good enough. The most widely used alternative is Meshmixer, and in this post we're going to look at how to generate support material using it's analysis tools. Import the model, this step is fairly self explanatory. Open Meshmixer and import the model you wish to print, either by clicking on the import button on the home screen and navigating to your model, or dragging your model into the program. I'll be using the standard bunny included in the program for this tutorial. Head over to the menu bar on the left of the screen and click on anal

troez3D

Search This Blog