Skip to main content

Print of the month March '18

Here we are again for another POTM.  If you caught last months you'll remember I talked about some larger scale 'mechs I printed, but as much as I loved them, they didn't feel... well.... big enough, if you know what I mean.  The Centurion especially was not really at a scale I was completely happy with, so I though I'd try a couple other 'mechs and see if I could make them a lot closer to 28mm scale or 1:64.  I went back and found some models of some well known 'mechs and got to printing!!


Each 'mech was around 50 hours of printing, and as cool as the Warhammer is (see below for a pic with the Marauder and the Warhammer together), I feel the Marauder came out especially well making it my print of the month for March 2018!

All three of the 'mechs printed at 28mm scale!

Information on the battlemech from sarna.net;
The Marauder was first built by General Motors in 2612 for use as an attack and direct fire support BattleMech. The first 'Mech to diverge from the traditional humanoid shape of previous machines, the Marauder was one of the most well-known 'Mechs in existence and originally meant to usher in a new generation of 'Mechs. Unfortunately, with the fall of the Star League, this new generation never quite materialized. On its own merits though, the Marauder was a devastatingly powerful 'Mech, outclassed only by larger machines like the Stalker and BattleMaster.


A 28mm figure stood in front of the Marauder

Anyone who has been keeping up with this blog or my Instagram will notice I'm on kind of a Battletech kick at the moment, but I promise I'll start printing something other than 'mechs in the near future!!

The Marauder (and the Warhammer for that matter) is one of the mechs from a group call the 'unseen'.  I'm not going to go massively into politics here but to cut a long story short, the rights to the designs for a lot of 'mechs are owned by another company called Harmony Gold.  Mechwarrior Online changed the designs just enough that they were able to reintroduce the designs back into the Battletech universe but now with HBS Battletech coming out, the lawsuits have started flying again and HG is making a big fuss.  For more information on the situation click here.

BACK TO THE PRINT! The layers on the majority of the model came out perfectly!  In fact I haven't printed many models where the layer-porn has been this good;




Statistics

 The PLA is the standard 3dFilaprint stuff that I use all the time.

Layer Height: 0.2mm
Print Quality: Normal
Total Height: 210mm
Scale: 28mm or 1:64
Total print time ~50hrs

Big thanks to Minimalistix on Thingiverse! Keep doing what you're doing mate, the models are amazing!

Right guys, I promise to do something a little different in the coming weeks because I'm sure you're all getting a little tired of Battletech by now so just hang in there...  Of course if you would like me to carry on with giant fighty mech stuff, just let me know in the comments!

See you next week!

Troez.


Labels:

Comments

Post a Comment

Popular posts from this blog

Ovion's Battletech 3D Printable Models

Hey guys, this week I wanted to draw attention to the Patreon of a guy on the Battletech Discord. He's a freelance 3d modeler and is doing some really cool stuff for tabletop Battletech, Warhammer and Dungeons & Dragons communities. As I know him from the Battletech Discord (Come check it out by the way) I'm going to showcase some of the models he's put up on his Patreon in relation to the game with the big stompy mechs!  All of his models are created by him from scratch and they look great!  I won't put any names with them, for copyrighting reasons, but I'm sure you Battletech fans out there will be able to figure out what's what. I picked a small selection of his models to show here, but go check out his page for the whole lot and he is releasing new models all the time. Tanks 'Mechs If you don't see what you like or if Battletech isn't your thing, he does commissions for custom models so it would definitely be wor
3 comments
Read more

Heroforge

If any of you play table top games like Dungeons and Dragons or Pathfinder you will know there is no limit to the companies providing high quality miniatures for your games.  However if you want to stray from the norm, and for example have a steampunk Dwarf or Elf, where do you go? Games Workshop make great miniatures but they are limited to the armies that they use in their games.  Places like Dark Sword Minis or Reaper provide a more traditional set of miniatures for fantasy type games and even a few for Sci Fi, but what if you need that one miniature that suits your character perfectly but doesn't exist? Well with the advent of 3D printing, some companies have begun to offer online customisation of miniatures which you can order printed or even download the STL files to print yourself at home.  The most well known of these sites is Heroforge . Heroforge allows you massive amounts of customisation for your miniature, from race and gender all the way down to clo
Post a Comment
Read more

GUIDE: Creating supports in Meshmixer

Hey guys, one of the most important things to think about when 3D printing is the support material.  With out sufficient support, models with steep overhangs or floating parts will simply fail to print correctly and you will end up with a pile of spaghetti. Most slicing programs will be able to create their own support, as mentioned in my "How to print" series of posts, however, for some models this is simply not good enough.  The most widely used alternative is Meshmixer, and in this post we're going to look at how to generate support material using it's analysis tools. Import the model, this step is fairly self explanatory.  Open Meshmixer and import the model you wish to print, either by clicking on the import button on the home screen and navigating to your model, or dragging your model into the program. I'll be using the standard bunny included in the program for this tutorial. Head over to the menu bar on the left of the screen and click on anal
Post a Comment
Read more